Memosens CCS50D: Digital chlorine dioxide sensor

Digital chlorine dioxide sensor Memosens CCS50D

Memosens sensor for water, process water and utilities in all industries

CCS50D

Compare

Memosens CCS50D digital chlorine dioxide sensor installed in CCA151 flow assembly

Memosens CCS50D digital chlorine dioxide sensor with adapter for installation in a CCA250 assembly

Memosens CCS50D chlorine dioxide sensor with adapter for installation in an immersion assembly

Specs at a glance

Measurement range

Trace: 0 to 5 mg/l ClO2
Standard: 0 to 20 mg/l ClO2
High: 0 to 200 mg/l ClO2
Process temperature

0 to 55 °C , non-freezing
(32 to 130 °F)
Process pressure

Max. 2 bar abs
(Max. 29 psi abs)

See all specifications

Field of application

Memosens CCS50D is a robust, low maintenance sensor for chlorine dioxide measurement. It provides stable and fast measured values in drinking water, process water and utilities. The sensor can be used to ensure efficient disinfection for highest water quality and safety, to avoid overdosing of chlorine dioxide or to ensure the absence of ClO₂ in beverage plants and reverse osmosis. Thanks to Memosens digital technology, CCS50D combines maximum process and data integrity with simple operation.

Memosens CCS50D is a chlorine dioxide sensor for skid builders and end customers. It measures reliably in:

Drinking water to ensure sufficient disinfection
Cooling systems or towers to avoid pathogen growth
Process water - for hygienic and safe packaging and bottling of products
Beverage plants to secure the absence of chlorine dioxide

Benefits

The right sensor version for every application: From trace measurement up to chlorine dioxide concentrations of 200 mg/l.
Fast response time provides accurate process view and enables prompt reaction to process changes as well as efficient process control.
Increased process safety: precise and long-term stable measurement ensures consistent process monitoring and allows for lowest disinfectant concentration.
Flexible installation: sensor can be installed in the CCA151 and CCA250 flow assemblies or in immersion assemblies. Measurement virtually flow independent at flow velocities above 5 l/h (CCA151), 30 l/h (CCA250) or above 15 cm/s (immersion).
More process up-time thanks to fast sensor exchange: precalibrate the sensor in your lab and then swap it into your process with plug & play.
Connection to the Liquiline multiparameter transmitter allows easy combination with other relevant parameters of liquid analysis.

Extended selection

High-end products
Highly functional and convenient

Technical excellence

Simplicity

What is FLEX?

Simple products
Easy to select, install and operate

Technical excellence

Simplicity

What is FLEX?

Standard products
Reliable, robust and low-maintenance

Technical excellence

Simplicity

What is FLEX?

High-end products
Highly functional and convenient

Technical excellence

Simplicity

What is FLEX?

Specialized products
Designed for demanding applications

Technical excellence

Simplicity

Variable

What is FLEX?

FLEX selections	Technical excellence	Simplicity
F L E X Fundamental selection Meet your basic measurement needs	Technical excellence	Simplicity
F L E X Lean selection Handle your core processes easily	Technical excellence	Simplicity
F L E X Extended selection Optimize your processes with innovative technologies	Technical excellence	Simplicity
F L E X Xpert selection Master your most challenging applications	Technical excellence	Simplicity Variable

Learn more about the FLEX selections

Loading alternative products

Success stories

An automated system for pH measurements at AVR

AVR Waste in Botlek, Rotterdam, processes up to 1.7 million tons of residual waste per year. Discover how they optimized their pH measurement thanks to Endress+Hauser
Read the full story
Pure high quality beer and clean wastewater

Discover how Heineken meets all regulations to protect the brazilian environment with the Viomax CAS51D digital nitrate or SAC sensor from Endress+Hauser.
Read the full story
Safe phosphate elimination with minimal effort

Thanks to Endress+Hauser the Wastewater treatment plant in Breuberg meets legal requirements and ensures safe phosphate elimination.
Read the full story
Smart vertical farming in big cities

Intuitive pH and conductivity measurement in smart vertical farming plants to meet quality requirements and ensure comprehensive monitoring of processes.
Read the full story
Toilet flushing with a fresh sea breeze

Using seawater to flush toilets can save a lot of drinking water. To ensure a constant water supply, the sensors used must function reliably to meet the water quality objectives (WQO).
Read the full story

Measuring principle

Chlorine dioxide
Application

Adequate disinfection in drinking water, preventing of pathogen formation in cooling water systems, water used to wash pre-packaged vegetables, ensures the absence of chlorine dioxide in beverage systems
Characteristic

Amperometric measurement of dissolved chlorine dioxide
Measurement range

Trace: 0 to 5 mg/l ClO2
Standard: 0 to 20 mg/l ClO2
High: 0 to 200 mg/l ClO2
Measuring principle

Closed, membrane covered measuring cell
Reduction of chlordioxide (ClO2) to chloride at the cathode with appr. 120mV
Design

Closed amperometric 2-electrode measuring cell with PVDF membrane
Material

Sensor shaft: POM
Membrane: PVDF
Membrane cap: PVDF
Dimension

Diameter: 25 mm (0.98 inch)
Length: 161 mm (6.34 inch)
Process temperature

0 to 55 °C , non-freezing
(32 to 130 °F)
Process pressure

Max. 2 bar abs
(Max. 29 psi abs)
Temperature sensor

10k NTC integrated (Memosens)
Connection

Inductive, digital connection head with Memosens

Language:	German
Version:	08/02/2019
File size:	727.7 KB
File name:	TI01353CDE_0219.pdf

	EN
20/07/2020
08/02/2019
19/05/2017

Language:	German
Version:	20/07/2020
File size:	1.4 MB
File name:	BA01773CDE_0320.pdf

Language:	English
Version:	08/02/2019
File size:	724 KB
File name:	TI01353CEN_0219.pdf

	EN
20/07/2020
08/02/2019
19/05/2017

Language:	Spanish
Version:	29/04/2022
File size:	42.4 KB
File name:	MSDS_CCV05-50x_51x_(E).pdf

	EN
21/09/2022

Digital chlorine dioxide sensor Memosens CCS50D

Memosens sensor for water, process water and utilities in all industries

Specs at a glance

Measurement range

Process temperature

Process pressure

Field of application

Benefits

Extended selection

Success stories

An automated system for pH measurements at AVR

Pure high quality beer and clean wastewater

Safe phosphate elimination with minimal effort

Smart vertical farming in big cities

Toilet flushing with a fresh sea breeze

Measuring principle

Application

Characteristic

Measurement range

Measuring principle

Design

Material

Dimension

Process temperature

Process pressure

Temperature sensor

Connection

Back

Memosens CCS50D Technische Information

CCS50D

Memosens CCS50D Technical Information

CCS50D

Disinfection applications

Expertise in liquid analysis

For the love of quality water

Aus Freude an gutem Wasser

Chlordioxid-Analyse in Trink- und Prozesswasser

Chlorine dioxide measurement in drinking and process water

CCV05-50x_51x (Ireland)

CCV05-50x_51x (Spain)

Back

Maintenance kits CCV05

Kit adapter CCS5x(D/E) for CCA250

Kit adapter CCS5x(D/E) for CYA112

Kit adapter CCS5x(D/E) for CYA27+CCA151

Kit adapter CCS5x(D/E) for CYA27-xxxB

photometer M+N PF-3, disinfection

Zero-point gel COY8

Input

Output / communication

Ingres protection

Input

Output / communication

Ingres protection

Ingres protection

Input

Output / communication

Ingres protection

Input

Output / communication

Ingres protection

Ingres protection

Choose from our suggested options

Individual configuration

Often bought together