Product picture temperature transmitter TMT84

iTEMP TMT84
Temperature head transmitter

Transformation of sensor signals into standardized digital output signals for all industries

TMT84

Compare

iTEMP TMT84 temperature head transmitter
installed on insert TS111

Specs at a glance

Accuracy

(Pt100) <= 0,1 K
(Pt100) <= 0,18 °F

See all specifications

Field of application

Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers digital converted signals from RTD and TC sensors, it also transfers resistance and voltage signals using PROFIBUS® PA communication. High measurement point availability by means of sensor monitoring functions. Diagnostics information according to NAMUR NE 107. Optimization of the measurement accuracy by sensor-transmitter matching.

2 input channels and PROFIBUS® PA protocol for the conversion of input signals into digital output signals
The device stands out due to signal reliability, long-term stability, high precision and advanced diagnostics (important in critical processes)
For the highest level of safety, availability and risk reduction
Installation in flat-face terminal head as per DIN EN 50446
Optional installation in field housings even for use in Ex d areas - with mounting brackets for wall or pipe mounting

Benefits

Easy and standardized communication via PROFIBUS® PA Profile 3.02
Meets the EMC requirements as per NAMUR NE 21 and the recommendations of NE 89 with regard to temperature transmitters with digital signal processing
Straightforward design of measuring points in Ex-areas through FISCO/FNICO conformity in accordance with IEC 600079-27
Safe operation in hazardous areas thanks to international approvals such as FM IS, NI, CSA IS, NI as well as ATEX Ex ia, Ex nA (Ex nL)
High accuracy through sensor-transmitter matching
Reliable operation with sensor monitoring and device hardware fault recognition
Rapid no-tools wiring due to optional spring terminal technology

Extended selection

High-end products
Highly functional and convenient

Technical excellence

Simplicity

What is FLEX?

Simple products
Easy to select, install and operate

Technical excellence

Simplicity

What is FLEX?

Standard products
Reliable, robust and low-maintenance

Technical excellence

Simplicity

What is FLEX?

High-end products
Highly functional and convenient

Technical excellence

Simplicity

What is FLEX?

Specialized products
Designed for demanding applications

Technical excellence

Simplicity

Variable

What is FLEX?

FLEX selections	Technical excellence	Simplicity
F L E X Fundamental selection Meet your basic measurement needs	Technical excellence	Simplicity
F L E X Lean selection Handle your core processes easily	Technical excellence	Simplicity
F L E X Extended selection Optimize your processes with innovative technologies	Technical excellence	Simplicity
F L E X Xpert selection Master your most challenging applications	Technical excellence	Simplicity Variable

Learn more about the FLEX selections

Loading alternative products

Predecessor

iTEMP PA TMT184

TMD834

Success stories

Prevent grain dust ignition in bulk tanks & silos

How temperature profiling increases plant safety and product quality in bulk tanks and silos for food storage.
Read the full story
Self-calibrating thermometers in hygienic processes

This white paper explains how self-calibrating thermometers can be used in hygienic process engineering. It details theory and practice as well as application examples. Learn more!
Read the full story
Medical autoclaves

New sensor technology automates recalibrations to reduce risk in batch sterilization. Learn More!
Read the full story
Automated inline self-calibration at Lonza

Automated inline self-calibration at Lonza for full monitoring throughout bioprocess
Read the full story
Iplom enhances catalyst life, process safety and efficiency

Iplom SpA sought to optimize its refining process to extend catalyst life and to increase safety in a hydrodesulfurization (HDS) application through precise 3D temperature profiling.
Read the full story

Measuring principle

Head transmitter
Input

2 x RTD, TC, Ohm, mV
Output

PROFIBUS PA
Auxiliary power supply

9...32 V DC (PROFIBUS PA)
9...17,5 V DC (FISCO/FNICO)
Communication

PROFIBUS PA
Installation

Terminal head form B
Accuracy

(Pt100) <= 0,1 K
(Pt100) <= 0,18 °F
Galvanic isolation

yes
Certification

ATEX II3G Ex ic IIC T6
ATEX II2D Ex tb IIIC Db
ATEX II1G Ex ia IIC T4/T5/T6
ATEX II3G Ex nA IIC T6
ATEX II3D Ex tc IIIC Dc
ATEX II1G Ex ia IIC T6, II3D
ATEX II3G Ex nA IIC T6, II3D
ATEX II2G Ex d T6, II2D Ex tb IIIC
FM+CSA IS, NI I/1+2/ABCD
CSA C/US General Purpose
FM IS, NI I/1+2/ABCD
CSA IS, NI I/1+2/ABCD
CSA XP, NI, DIP I, II, III/1+2/A-G
NEPSI Ex ia IIC T4/T5/T6
TIIS Ex ia IIC T6
NEPSI Ex nA IIC T4/T5/T6
IECEx Ex ia IIC T4/T5/T6
FM XP, NI, DIP I, II, III/1+2/A-G
EAC Ex ia IIC T6 Ga
EAC Ex d IIC T6 Gb
IECEx Ex tb IIIC Db
IECEx Ex d T6 Gb, Ex tb IIIC Db
INMETRO Ex ia [ia Ga] IIC T6 Gb
INMETRO Ex d T6 Gb, Ex tb IIIC Db
NEPSI Ex d IIC T6 Gb
UK II2D Ex tb IIIC Db
UK II3D Ex tc IIIC Dc
UK II1G Ex ia IIC T6 Ga, II3D Ex ia IIIC Dc
UK II3G Ex nA IIC Gc, II3D Ex tc IIIC Dc
UK II2G Ex db IIC T6 Gb, II2D Ex tb IIIC Db
ATEX IECEx II1G Ex ia IIC T6 Ga

	EN
04/05/2022
31/03/2020
07/03/2017
13/09/2012
01/08/2011

Language:	German
Version:	04/05/2022
File size:	2.3 MB
File name:	BA00257RDE_0622-00.pdf

	EN
20/11/2021
31/03/2020
06/02/2017
28/06/2012
21/06/2012

Language:	German
Version:	20/11/2021
File size:	1.5 MB
File name:	TI00138RDE_0721-00.pdf

	EN
20/11/2021
31/03/2020
06/02/2017
28/06/2012
21/06/2012

Language:	English
Version:	20/11/2021
File size:	1.5 MB
File name:	TI00138REN_0721-00.pdf

	EN
01/03/2013
01/05/2008
01/04/2008

	EN
15/03/2020
18/03/2016
29/10/2014
07/11/2011
01/07/2008

	EN
14/11/2022
15/08/2022
19/11/2018
23/03/2016
05/05/2015

	EN
20/06/2022
11/11/2020
07/11/2018
20/06/2016
23/01/2012

iTEMP TMT84Temperature head transmitter

Transformation of sensor signals into standardized digital output signals for all industries

Specs at a glance

Accuracy

Field of application

Benefits

Extended selection

Predecessor

Success stories

Prevent grain dust ignition in bulk tanks & silos

Self-calibrating thermometers in hygienic processes

Medical autoclaves

Automated inline self-calibration at Lonza

Iplom enhances catalyst life, process safety and efficiency

Measuring principle

Input

Output

Auxiliary power supply

Communication

Installation

Accuracy

Galvanic isolation

Certification

Back

iTEMP TMT84

iTEMP TMT84

iTEMP TMT84

iTEMP TMT84

TID10 Operating Instructions

iTEMP TMT84

iTEMP TMT84, TMT85

iTEMP TMT84, TMT85

iTEMP TMT71, TMT72, TMT82, TMT84, TMT85, TMT86, TMT182B

iTEMP TMT82, TMT84, TMT85

iTEMP TMT84, TMT85

iTEMP TMT71, TMT72, TMT82, TMT84, TMT85, TMT86

iTEMP TMT71, TMT72, TMT82, TMT84, TMT85, TMT86

iTEMP TMT84, TMT85

ATEX Safety instructions iTEMP® TMT84 and TMT85

iTEMP TMT84, TMT85, OTMT84, OTMT85

ATEX Safety instructions iTEMP® TMT84 and TMT85

temperature transmitter iTEMP TMT82, TMT84, TMT85 EAC Ex Safety Instructions

iTEMP TMT84, TMT85

iTEMP TMT82, TMT84, TMT85

Control Drawing FM XP, Non incendive, dust ignition proof, DIP ITEMP® TMT82, TMT84, TMT85

Control Drawing FM Intrinsical Safety, Non incendive iTEMP® TMT84 and iTEMP® TMT85

Control Drawing FM XP, Non incendive, Dust Ignition Proof iTEMP® TMT82, TMT84, TMT85

Control Drawing CSA Intrinsical Safety, Non incendive iTEMP® TMT84 and iTEMP® TMT85

iTEMP® TMT84, TMT85 Control Drawing CSA (XP, NI, DIP)

Device viewer

DIN SPEC 91406

Integration Tutorial ME01 Mitsubishi Electric MELSEC System Q and PROFIBUS for Water & Wastewater Industry

Simatic PDM PROFIBUS Package V1.12.00 Manufacturer Information includes PDM - Device List, Release Notes – PROFIBUS

iTEMP TMT84
Temperature head transmitter