Analog total chlorine sensor
CCS120

Analog total chlorine sensor 
CCS120 ©Endress+Hauser

Disinfection sensor for all water and wastewater applications

CCS120 is the analog sensor for standard measurement of total chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance effort.

  • Benefits

    • Recalibration intervals approx. 1 to 3 months under constant operating conditions

    • Easy membrane replacement thanks to prefabricated membrane cap

    • Measured values are not affected by conductivity fluctuation

    • Measurement virtually independent of flow rate in...

  • Field of application

    CCS120 measures total chlorine in:

    • Drinking and process water
      - Process and distribution networks
      - Monitoring, control and optimization of disinfection processes

    • Wastewater treatment plants
      - Disinfection monitoring and control in wastewater outlet
      -...

Documents / Manuals / Software

Accessories / Spare parts

Nr
Order code
Specification
    • Order code 71412917

      Kit CCS120/120D, maintenance set

      Content: Electrolyte 50 ml/ 1.69 fl.oz. 2x membrane cap

    • Order code 71412916

      Kit CCS120/120D, Electrolyte 50 ml

      Content: Electrolyte 50 ml/ 1.69 fl.oz.

    • Order code 51516343

      Electrolyte,Total Chlorine Sensor CCS120

      Electrolyte,Total Chlorine Sensor CCS120

    • Order code 51517284

      Maintenance Kit, CCS120

      two membrane caps, electrolyte

    • Order code 51517204

      Connection cable,CCS120,CCE-station, 1m

    • Order code 71105209

      Viton ring set for CCS120/120D

      2 pieces, replacement for silicone ring

    • Order code 50003987

      Junction box VBM

      with 10 high-impedance terminals Protection class: IP65 Dimensions: 125 x 80 x 55 mm (L x W x H)

    • Order code 71257946

      photometer M+N PF-3, desinf. (chlorine)

      colorimetric measurement of free and total chlorine 0,05 .. 6mg/l Disinfection, drinking and process water hand held photometer, IP67-graded, with cuvettes, DPD, according to ISO 7393 deliverey in plastic case, test kit for free and total chlorine included ::hand held photometer for field cal. and verification of desinfection loops